

Introduction: The Critical Importance of Drying Dendrobium
Dendrobium (Shihu), a highly valued herb in traditional medicine, requires meticulous post-harvest processing to preserve its potent bioactive compounds, medicinal efficacy, and market value. The drying process is not merely about removing moisture; it is a delicate art that directly determines the final product’s color, texture, aroma, and most importantly, its therapeutic quality. Improper drying can lead to mold growth, loss of active ingredients, discoloration, and a significant reduction in shelf life and economic value. MeiYa’s advanced heat pump drying technology provides the precise, controlled, and gentle environment essential for producing premium-grade dried Dendrobium that meets the highest standards of quality and potency.
The MeiYa Advantage: Preserving Value Through Precision
Traditional drying methods for Dendrobium, such as open-air sun-drying or simple heated rooms, are fraught with inconsistencies. They are heavily dependent on weather, prone to contamination, and offer poor control over temperature and humidity. This often results in uneven drying, case-hardening (where the outside dries too fast, trapping moisture inside), nutrient degradation, and an unattractive final color.
MeiYa Heat Pump Dryers are engineered to overcome these challenges, offering a transformative and reliable solution:
- Precise Medium-High Temperature Control: The optimal drying of Dendrobium requires sustained, controlled heat. MeiYa’s intelligent system allows for exact programming and maintenance of temperatures within the critical 70°C to 75°C range. This ensures thorough dehydration without damaging the delicate cellular structure and active compounds of the herb .
- Intelligent Intermittent Drying Cycle: Mimicking the best traditional practices, MeiYa dryers can be programmed for an automated intermittent drying cycle. The system can run for approximately 24 hours, then pause for 3-5 hours to allow internal moisture to migrate to the surface (a process known as “sweating” or “moisture equilibration”), before resuming. This prevents case-hardening and ensures uniform drying from the inside out, which is crucial for achieving the desired golden-yellow color and proper texture .
- Superior Energy Efficiency: By efficiently extracting and recycling thermal energy from the ambient air, MeiYa dryers consume significantly less electricity than conventional electric heating dryers. This translates to dramatically lower operating costs, making the processing of high-value herbs like Dendrobium more profitable .
- Consistent, High-Quality Output: The automated process eliminates human error and environmental variability. Every batch dried in a MeiYa unit achieves a consistent final moisture content of below 8%, a vibrant golden-yellow hue, and retains maximum medicinal value. The typical yield is a high-quality ratio of 1 kg of dried product from every 10 kg of fresh Dendrobium .
- Fully Automated & Labor-Saving: Once the multi-day drying program is set, the system operates autonomously. This eliminates the need for constant manual monitoring, turning, and weather-watching, significantly reducing labor costs and ensuring process repeatability.
- Hygienic & Contamination-Free: The enclosed drying chamber provides a clean processing environment, protecting the precious herb from dust, insects, and pollutants throughout the entire 4-5 day cycle.
Optimized Drying Protocol for Dendrobium with MeiYa Dryers
Producing top-tier dried Dendrobium (often processed into “Fengdou”) requires patience and precision. MeiYa’s technology standardizes this complex process.
Stage 1: Preparation
- Selection & Cleaning: Start with fresh, high-quality Dendrobium stems. Clean them thoroughly to remove any soil or impurities.
- Pre-processing (Optional): Depending on the final product form (whole stems or curled Fengdou), perform necessary cutting, twisting, or shaping while the stems are still fresh and pliable.
Stage 2: The Precision Intermittent Drying Cycle
- Loading: Arrange the prepared Dendrobium evenly on trays inside the MeiYa drying chamber, ensuring good airflow between the pieces.
- Initial Drying Phase: Set the dryer to a constant temperature range of 70°C to 75°C. Begin the drying process. This first continuous phase typically lasts for about 24 hours .
- Critical Resting Period: After the initial 24-hour drying, stop the dryer. Allow the Dendrobium to rest inside the chamber or a controlled environment for 3 to 5 hours. This pause is crucial as it lets the internal moisture slowly migrate to the surface, preparing it for the next drying phase .
- Re-drying Phase: Restart the MeiYa dryer, maintaining the same temperature range of 70°C to 75°C. Continue drying.
- Cycle Repetition & Completion: The cycle of drying and resting may be repeated depending on the initial moisture content and batch size. The total drying time typically ranges from 4 to 5 days. The process is complete when the Dendrobium reaches the following key benchmarks:
- Moisture Content: Below 8%.
- Color: A uniform, attractive golden-yellow.
- Texture: Dry, crisp, and properly curled (if making Fengdou).
- Yield: Approximately a 10:1 fresh-to-dry weight ratio .
Stage 3: Cooling & Packaging
- Conditioning: Once the target moisture is achieved, allow the dried Dendrobium to cool naturally to room temperature in a dry environment.
- Sorting & Packaging: Sort the dried product by grade. Package immediately in airtight, moisture-proof containers or bags to protect its quality, potency, and color during storage and transportation.
Conclusion
Drying Dendrobium is a test of precision and patience, where the right technology makes all the difference. The MeiYa Heat Pump Dryer masters this challenge by providing unmatched control over temperature and implementing the critical intermittent drying cycle essential for quality. By replacing unreliable traditional methods with an automated, energy-efficient, and precise system, MeiYa guarantees a final product with superior color, optimal moisture content, maximum preservation of active compounds, and consistent high yield. This technology empowers herb processors to enhance product value, ensure batch-to-batch consistency, and build a reputable, profitable business.
Achieve the golden standard in Dendrobium drying with MeiYa’s precision technology.
Contact Us for Your Customized Drying Solution: 📧 Email: [email protected] 👤 Contact: Ray Ren 📱 WhatsApp/WeChat/Mobile: +86 133 4676 7871
MeiYa – Engineering Smarter Drying for a Healthier World.

MeiYa Heat Pump Dryer Machine
- No MOQ & Customization Unlimited
- Drying + Dehumidify + Cooling
- PLC + Touch Screen Control
- 7-10 Days Delivery Time
Parameter:
| Single dryer+drying chamber | ||||
| Model | Unit | MY-03RD | MY-06RD | MY-12RD |
| Power input | KW | 5.5 | 9.5 | 19.4 |
| power supply | V/PH/HZ | 380V/3PH,50/60HZ | 380V/3PH,50/60HZ | |
| 220V/1PH,50/60HZ | ||||
| Rated current | A | 9.6A(380V),22A(220V) | 17.0 | 30.0 |
| Heating capacity | KW | 10.5 | 21.0 | 42.0 |
| Cooling capacity | KW | 7.8 | 18.0 | 32.0 |
| Dehumidity | L/H | 12.0 | 25.0 | 50.0 |
| Max temperature | ℃ | ≤75 | ≤75 | ≤75 |
| Working condition | ℃ | 0-43 | 0-43 | 0-43 |
| Electric shock protection grade | 1 | 1 | 1 | |
| Max exhause pressure | M(P)a | 30 | 30 | 30 |
| Noise | d(B(A | 75 | 75 | 75 |
| Power consumption/H | KWH | 4.8 | 8.5 | 15.0 |
| Electric heater | KW | 3.0 | 6.0 | 12.0 |
| Blowing type | / | HORIZONTAL BLOWING TYPE | ||
| Demsnssion of dryer | MM | 1650*856*1280 | 1806*1065*1280 | 2089*1260*1580 |
| Weight | KG | 180 | 285 | 480 |
Buying Guiding:
Recommend drying machine+Drying chamber sizes
| Model | Description | Drying Capacity (Per Batch) | Drying Room Size (mm) | Trolleys Number | Trays Number |
| MY-01RD-16L | All-in-one Machine | Up to 100Kg | All-in-one | 16 | |
| MY-01RD-36L | All-in-one Machine | Up to 250Kg | All-in-one | 36 | |
| MY-03RD-60L | All-in-one Machine | Up to 400Kg | All-in-one | 60 | |
| MY-03RD | 1 Unit + 1 Drying Room | Up to 700Kg | 3200*2190*2200 | 8 | 128 |
| MY-06RD | 1 Unit + 1 Drying Room | Up to 1,300Kg | 6150*2190*2200 | 14 | 224 |
| MY-12RD | 1 Unit + 1 Drying Room | Up to 2,000Kg | 6350*3230*2200 | 20 | 320 |
| MY-15RD | 1 Unit + 1 Drying Room | Up to 2,200Kg | 6350*3230*2200 | 20 | 320 |
| MY-03RD (Double) | 2 Units + 1 Drying Room | Up to 1,700Kg | 7050*2190*2200 | 16 | 256 |
| MY-06RD (Double) | 2 Units + 1 Drying Room | Up to 2,500Kg | 10100*2190*2200 | 24 | 384 |
| MY-12RD (Double) | 2 Units + 1 Drying Room | Up to 4,400Kg | 11860*3230*2200 | 40 | 640 |
| MY-15RD (Double) | 2 Units + 1 Drying Room | Up to 5,200Kg | 11860*3230*2200 | 40 | 640 |
| MY-25RD (Double) | 2 Units + 1 Drying Room | Up to 10,000Kg | 13520*6070*2200 | 48 | 1920 |
Our Projects:



Our Factory:

Production Processing:

Drying Machine Components:


Standard Working Modes:
- Typically 3 modes available:
- Drying Only
- Rapid temperature rise; unable to discharge moist air
- Drying + Dehumidify
- Chamber temperature rises while discharging moist air
- Cooling
- Temperature can drop to 10°C (minimum)
- Important Note:
- If temperature control becomes unstable, switch to Temperature & Humidity Mode.
- Drying Only
Ray. Ren | Sales Manager
GUANGZHOU MEIYA ELECTRIC EQUIPMENT TECHNOLOGY CO., LTD.
📍 Add: No.217, 2nd Ruiyun Road, Xiuquan Street, Huadu District, Guangzhou, Guangdong, China
📞 Tel/WhatsApp/WeChat: +86 133 4676 7871
✉️ Email: [email protected]
🌐 Website: https://www.my-dryer.com









